Nickel Dragonfly Door Knocker
This nickel plated Dragonfly Door Knocker features wings that are intricately etched and span across the door. The door knocker is hinged at the end of the tail whilst the head of the dragonfly is used to knock onto the supplied striking plate. This door knocker would look at home on the door of a cottage, town house or modern home.
Size: Length 13cm x Width 16cm x Depth 3cm
Striking Plate Size: Diameter 3cm
Materials: Nickel plated solid brass
Finish: Polished nickel finish that is hard wearing and durable
Fixing Information: This dragonfly door knocker can be attached to the door with the 2 bolts that are supplied. Please note, a hole will need to be drilled all the way through your chosen door to fit this door knocker. The fixings are approximately 9.5cm apart and this door knocker is suitable for wooden, PVCu and composite doors.
Frequently Asked Questions
Is this door knocker suitable for a composite PVCu door?
Yes, our nickel dragonfly door knocker can be fitted to composite PVCu doors as well as wooden doors. However, we recommend that you check with the door manufacturer as fitting a door knocker may void the warranty.
Will this door knocker age over time?
This dragonfly door knocker is manufactured from solid brass and then nickel plated. To avoid your nickel finish from tarnishing, we recommend cleaning this door knocker every 3-6 months. Wash the door knocker with warm water and a cloth, then use a suitable metal cleaner for persistent blemishes, then polish to keep your nickel looking like new.
Are the fixings supplied with this door knocker?
Yes, we provide two bolts and nuts with this door knocker that can be used to fix it your door. The bolts are not visible once fitted, however the bolt nut will be visible on the inside of your door. The nut is made from solid brass.
How do I fit this dragonfly door knocker?
This door knocker can be fixed to the front of your door using the two bolts and nuts provided. This method of fixing results in two bolts being visible on the inside of your door. To fit this door knocker; mark on your door where you’d like the bolts to be with a pencil, drill two holes to the same diameter as the bolts, then thread the bolts into the door knocker and place through the door. Once in position, attach the nuts to the end of the bolts on the inside of the door and tighten until the door knocker is firmly attached. Read our full guide on how to fit a door knocker for more information and a step-by-step guide.